Fangyu(shanghai)Automation Technology Co.,Ltd
Fangyu(shanghai)Automation Technology Co.,Ltd
Add to Cart
Product Description| Size | Conductor Strands | Insulation Thickness |
| 2x1.5mm2 | 7/0.52mm | 0.6mm |
| 2x2.5mm2 | 7/0.68mm | 0.7mm |
| 2x1.5mm2+1.5mm2 | 7/0.52mm | 0.6mm |
| 2x2.5mm2+2.5mm2 | 7/0.68mm | 0.7mm |
| 2x4mm2+2.5mm2 | 7/0.85mm+7/0.68mm | 0.8mm |
| 2x6mm2+2.5mm2 | 7/1.04mm+7/0.68mm | 0.8m |
Shanghai Qifan Cable Co., Ltd. founded in 1994, has been specialized in R&D and manufacturing of electric wires and cables for more than 20 years, and it has advanced production and testing equipment.
Qifan Cable has ability in producing many varieties of cables, such as High Voltage cables, Medium Voltage cables, Low Voltage cables, Control cables, Instrument cables, Building wires, Rubber cables etc. Qifan Cable has sold its products to over 30 countries and regions in Asia, Europe, Oceania, America and Africa. As a result, they are widely used in such industries as water conservancy, electricity, metallurgy, petrochemical, railway, transportation, communication, construction, urban, infrastructure construction, etc.
Since its establishment, Qifan Cable has abided by the operation principle of quality foremost. It took the lead in passing ISO 9001:2000 quality system certification in 2006 and ISO 14001:2004 environmental management system certification.
Qifan Cable-Make pioneering efforts and forge ahead!
Flat Cable BVVB 2X1.5mm2+E, also known as Flat Twin and Earth Cable, is a type of electrical cable commonly used for indoor wiring in residential and commercial buildings. It is specifically designed for fixed installations, such as power distribution within walls or under flooring.
Here's a breakdown of its specifications:
Conductors: The cable consists of two conductors, both made of copper. Each conductor has a cross-sectional area of 1.5mm². The copper conductors offer good electrical conductivity and are commonly used in building wiring due to their efficiency.
Insulation: The conductors are individually insulated to prevent contact with each other and avoid short circuits. The insulation material used is typically PVC (Polyvinyl Chloride), which provides electrical insulation and protection against moisture and physical damage.
Earth Conductor: The "+E" in the cable designation indicates the presence of an earth conductor. It is a separate conductor, commonly made of copper, that provides a protective grounding connection. It helps to ensure safety by providing a path for electrical fault current to flow in the event of a short circuit or equipment failure.
Twin and Earth Configuration: The "Twin and Earth" refers to the configuration of the conductors. The two active conductors (phase and neutral) are arranged side by side in a flat configuration, while the earth conductor runs parallel but separate from them.
Sheath: The cable is typically covered by an outer sheath made of PVC. The sheath offers additional protection to the conductors and helps in the installation process by providing mechanical strength and resistance against abrasion or damage.
Flat Cable BVVB 2X1.5mm2+E is commonly used for powering lighting circuits, socket outlets, and other general-purpose electrical applications within buildings. It is important to follow local electrical codes and regulations when installing and using this cable to ensure compliance and safety standards.