Fangyu(shanghai)Automation Technology Co.,Ltd
Fangyu(shanghai)Automation Technology Co.,Ltd
Add to Cart
Standard: National Standard IEC and ASTM
Rated Voltage: 0.6/1KV, 11KV, 33KV
Construction
Phase conductor: aluminum stranded(AAC)
Neutral conductor: aluminum stranded(AAC), aluminum alloy stranded(AAAC), aluminum conductor steel reinforced(ACSR)
Insulation: XLPE or PE
Application: The cables are designed for aerial power lines and room-entrance wires with voltage up to and including 0.6/1KV.
Uesd for overhead service application such as street linghting, outdoor lighting and temporary service for cunstruction.which improves the safety and reliance of electrified wire netting.
1 Type
Duplex Service Drop, Triplex Service Drop, Quadruplex Service Drop
a Duplex Service Drop
Applications:To supply 120 volt aerial service for temporary service at construction sites,outdoor or street lighting . For service at 600 volts or lower at a conductor temperature of 75 maximum.
b Triplex Service Drop
Applications: To supply power from the ulility`s lines to the consumer`s weatherhead. For service at 600 volts or less(phase to phase ) at a conductor temperature of 75 maximum for PE insulation or 90 maximum for XLPE insulation .
c Quadruplex Service Drop
Applications: Used to supply 3 phase power , usually from a pole-mounted transformer to the use`s servic head where connection to the service entance cable is made . To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75 for PE insulated conductors or 90 for XLPE insulated conductors.
2 Construction
a Phase Conductor construction:The phase conductor is aluminum alloy 1350-H19 hard-drawn, compressed concentric-lay-stranded.
b Neutral Conductor Construction
Cable assemblies are available with the following neutral conductors:
Aluminum conductors, coated-steel reinforced (ACSR), concentric-lay-stranded
Aluminum alloy 1350-H19 hard-drawn, concentric-lay-stranded
Aluminum alloy 6201-T81, concentric-lay-stranded
c Insulation Material
The standard insulation on the phase conductor is black low-density crosslinked polyethylene (XLPE)
Alternatively, black linear low-density polyethylene (LDPE) insulation with a 75°C temperature rating is available upon request.
| Phase conductor | |||||||||
| Nominal cross section area | Mm2 | 10 | 16 | 25 | 35 | 50 | 70 | 95 | 120 |
| Number of cores | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | |
| Roots/diameter of phase conductor | 7/1.35 | 7/1.7 | 7/2.14 | 7/2.54 | 7/3.0 | 19/2.16 | 19/2.54 | 19/2.86 | |
| Approx diameter of compacted conductor | mm | 4.05 | 4.8 | 6 | 7 | 8.3 | 10 | 11.6 | 13.2 |
| Nominal thickness of insulation | mm | 1.0 | 1.2 | 1.2 | 1.4 | 1.4 | 1.4 | 1.6 | 1.6 |
| Diameter of phase core | mm | 6.05 | 7.2 | 8.4 | 9.8 | 11.1 | 12.8 | 14.8 | 16.4 |
| Max D.C resistance at 20ºC | Ω/KM | 3.08 | 1.91 | 1.2 | 0.868 | 0.641 | 0.443 | 0.32 | 0.253 |
| Approx weight of phase core | Kg/km | 127.24 | 196.29 | 277.24 | 380.8 | 510.47 | 686.22 | 954.14 | 1176.96 |
| Messenger conductor | |||||||||
| Nominal cross section area | Mm2 | 10 | 16 | 25 | 35 | 50 | 70 | 95 | 120 |
| Number of cores | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |
| Roots/diameter of phase conductor | 7/1.35 | 7/1.7 | 7/2.14 | 7/2.54 | 7/3.0 | 19/2.16 | 19/2.52 | 19/2.82 | |
| Approx diameter of messenger core | mm | 4.05 | 5.1 | 6.42 | 7.62 | 9 | 10.8 | 12.6 | 14.1 |
| Max D.C resistance at 20ºC | Ω/KM | 3.08 | 1.91 | 1.2 | 0.868 | 0.641 | 0.443 | 0.32 | 0.253 |
| Approx weight of messenger core | Kg/km | 27.62 | 43.8 | 69.4 | 94.71 | 136.38 | 192.98 | 262.66 | 328.94 |
| Breaking load | KN | 1.65 | 2.07 | 3.3 | 4.5 | 6.2 | 8.9 | 12.3 | 15.6 |
| Complete cable | |||||||||
| Approx diameter | mm | 13.43 | 16.15 | 19.13 | 22.32 | 25.59 | 29.4 | 34.49 | 38.84 |
| Approx weight | Kg/km | 154.86 | 240.09 | 346.64 | 475.51 | 646.85 | 879.2 | 1216.8 | 1505.9 |
| Packing length | M/Drum | 1000 | 1000 | 1000 | 1000 | 1000 | 500 | 500 | 500 |
Main products: 220kv and below power cables, rubber sheathed cables, photovoltaic wires, photovoltaic special cables, control cables, computer cables, steel core aluminum stranded wires, pre-branch cables, low voltage halogen-free environmentally friendly cables, coal mining cables, fluorosilicone insulation High temperature resistant cables, shield cables, cables for ship electrical equipment, photoelectric composite cables, high-strength towing cables, cables for photovoltaic systems, cables for rail transit vehicles with AC rated voltage 3kv and below, local area network cables, inverter cables, radio frequency cables , nuclear power plant cables, port machinery cables, mineral insulated cables, submarine cables and more than 100 varieties
FAQ
Q1: When can I get the price?
We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
Q2: How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
Q3: How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days.
The samples will be sent to you via express and arrive in 3~5 days.
Q4: What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.
Voltage Rating: The "0.6/1kV" indicates the maximum voltage that the cable can handle. In this case, it is suitable for systems with a rated voltage of up to 0.6 kilovolts (kV) for phase-to-phase applications and 1 kilovolt (kV) for phase-to-ground applications.
Conductors: The conductors in ABC cables are made of aluminum, which offers good electrical conductivity and is lightweight. Aluminum conductors are commonly used in overhead power lines due to their cost-effectiveness and corrosion resistance.
Insulation: The conductors are insulated with XLPE (Cross-Linked Polyethylene), providing excellent electrical insulation properties. XLPE insulation offers high dielectric strength, thermal stability, and resistance to moisture, heat, and chemicals.
Twisted Configuration: ABC cables are designed with twisted conductors. This configuration helps to reduce electromagnetic interference (EMI) and improve the mechanical strength of the cable. The twisting also ensures better balance and stability during installation.
Aerial Bundle Cable: The term "Aerial Bundle Cable" refers to the installation method of the cable, which is typically done overhead using support structures such as poles or towers. The cable is often bundled together with other conductors and may include additional components such as neutral wires and messenger wires.
ABC cables are commonly used for power distribution in residential areas, rural areas, and other locations where overhead installation is preferred. They offer advantages such as simplified installation, reduced maintenance costs, and improved safety due to the bundled configuration, which minimizes the risk of contact with live conductors.
It's important to note that specific standards and regulations may apply to the design, installation, and use of ABC cables in different regions. Consulting local electrical codes and engaging with qualified professionals is recommended for proper installation and adherence to safety guidelines.